Looking for information about ProntoForms features and functionality? Visit our Product Documentation Portal.
- Testing Data Destinations
- Viewing Data Destination Execution Details
- Troubleshooting Failed Executions
- Re-Executing a Failed Execution
After adding or updating a ProntoForms Data Destination, it is important to test it thoroughly before using it in production.
A Data Destination executes each time that a form linked to the data destination is submitted. When it executes, the Data Destination then attempts to route data to the configured location. Executions (one per destination per form submission) are listed in the web administration portal.
The web portal offers several ways to view the details of a data destination execution, making it easy to determine if filters, connections, and other options are configured correctly. It also clearly lists details of execution failures.
When incorrect configuration results in a failure, it is simple to update the data destination and re-execute failed executions to try sending the data again.
A key tool in testing and troubleshooting Data Destinations is ensuring that your team has a Problem Contact Email Address configured. This is the easiest way to gain visibility to data destination execution failures; an email notification will be sent to the provided address. The problem contact email address can be configured through Team Settings (under General Settings).
When a data destination fails, ProntoForms automatically retries the destination at set intervals. Most failures correct themselves and require no intervention; however, ProntoForms will automatically send a failure notification email to the Problem Contact Email Address after the third failure (approximately an hour after the first attempt). This can be configured under the Destination Basics tab of the data destination setup. For more information, see the topic Set Up Failure Notification Emails.
The only way to test a data destination is to submit a form linked to the data destination. While some data destination configuration issues will become obvious when a form is submitted (like if the execution fails), other configuration errors may not be immediately noticeable. Without thorough testing, these errors can make it into production before being spotted. Save yourself production errors and delays by testing your destinations before deploying to your users.
A connection that is not functional will cause data destination executions to fail. Submit a form linked to the data destination, check that the execution has not failed, and check that every document/notification was successfully delivered to the configured locations/recipients.
Disable this destination: Enable this option if you wish to create the destination without allowing it to accept form submissions -- it can still be linked in forms, but the destination will not execute if forms are submitted.
Note: Disabled data destinations will still appear in the Destinations tab in the form builder, but it will not receive any form submissions.
Ensure that any filtering that is configured functions correctly, and the destination only executes when you want it to. This is particularly important in the case of Custom Filter rules, which use regular expressions, and a single incorrect character can break the expression. Test filter rules by submitting forms in a test environment, testing all answers referenced in filter rules to determine if the rules behave as expected.
- Answers that should pass the filter rules
- Answers that should NOT pass the filter rules
You will want to test other things based on your specific filter rules and the use of your form. It is best if questions referenced in filter rules have pre-defined answers (dropdown, radiobutton, multi-select, Yes/No), as it is impossible to predict all potential typos/errors made by mobile users and to build a regular expression to accommodate them.
Most fields that you can enter DREL in will show sample text underneath the field as you are configuring it, so make use of this. For example, if %u[name] is entered in the field, the sample text should list a "sample" username -- if it doesn't, something has been entered incorrectly.
Data Destinations might use DREL in a number of places:
- Folder Expressions
- Filename Expressions
- Email Subject Lines
- Pushing data to specific fields
- And more...
Any question referenced in DREL should be marked as "Required" in the form, particularly if it is the only field in the expression; if a filename expression ends up empty, for example, the transmission of data to most destinations will fail. Test that this cannot happen in your forms.
Some data destinations push data from a selected ProntoForms field to a specific field in the destination service. Salesforce Data destinations require this, for example. Salesforce has validation set on many of their fields -- an email field will only accept a correctly formatted email, and an integer field will only accept numbers. If data pushed to Salesforce doesn't match the validation, no record will be created in Salesforce. For these data destinations, and others that push to services that use validation, it is best to ensure that the ProntoForms data type matches the validation. Be sure to test the form and make sure that users cannot enter anything into these fields that the destination service will not accept.
Once forms linked to the Data Destination have been submitted, there are a few ways that Admin users can view execution details.
Navigate to the desired Data Destination's page. On the right side of the browser there will be a table labeled Execution Statistics, showing the number of form submissions that have been processed by the Data Destination. Clicking on any of the states (Active, Successful) will bring up a page with the list
Active: The number of data destination executions in process.
Successful: The number of data destination executions that were successful.
Skipped: If a data destination has been "skipped," a form submission failed to save properly and the data destination was not processed. This can occur for a number of reasons; contact ProntoForms support for troubleshooting help.
Filtered: The number of data destination executions with submitted data that did not meet the filtering rules.
Failed: The number of data destination executions that have failed.
To see more detailed data on each execution, navigate to the Data & Analytics tab in the main menu, and select All Form Activity. All submitted forms will be listed; if a data destination execution failed there will be a red "X" icon beside the name. Select the form submission reference number to view details.
Form Submission Processing
The Form Submission Processing table shows details on the execution of each processing step of the data on the ProntoForms server. Each step occurs in the order that it is listed. Note that this table does not include any information about processing/handling of the data in the mobile app, before the form was submitted.
The standard processing steps are as follows:
- Save Data: Saves the data to the server. The subsequent steps will not be completed if "Save Data" fails. Contact our support team if this step fails.
- Resolve Geo Address: Will be skipped if no geolocation was collected by the device and attached to the form.
- Process Images: reading of images collected with the form. Will be skipped if no images are attached. If this step fails, the subsequent steps can still process.
- Data Destination: A new row will be listed for each data destination linked to the form. If one data destination execution fails, the others can still execute.
Symbols: Processing Status
- The step has been successfully processed.
- The step has failed. See details for more information.
- The step has been skipped. This usually happens because the step is not applicable.
- The "Process Images" step will be skipped if there are no images in the form.
- A Data Destination execution will be skipped if the form submission does not meet the destination's filter rules.
A Data Destination execution will only show as "skipped" if the submitted data does not meet filter rules. Either adjust the filter rules, or change your source data so that it will meet filter rules. Details will be provided about the string that is being filtered. In the sample below, the question referenced in the filter rule is not returning a value, causing the email data destination to skip executing, and not send an email.
Occasionally, a data destination will fail due to a glitch or a momentary outage in either ProntoForms or the external service the destination is linked to. Sometimes simply re-executing the failed execution (see below) will resolve the issue.
The error causing the problem will be listed in the "details" column of the form submissions processing table. The messages listed can vary widely, but are typically reasonably descriptive and make the cause quite clear. One common problem is security solutions such as firewalls blocking ProntoForms IP addresses. If you are uncertain of the cause, feel free to contact ProntoForms Support and we will look into the details of the error for you.
If a data destination execution fails, the ProntoForms server will automatically re-attempt until the form submission either executes successfully or is removed from the ProntoForms system (see Form Submission Retention and Deletion for timelines). When a data destination execution fails, only the form submission that failed to process will be re-executed. Other form submissions successfully processed by the data destination will not re-execute.
The first and second attempts at re-execution occur after 30 minutes. The server will continue to retry in an "exponential back-off" process (increasingly longer intervals between attempts). This is done in order to avoid burdening a service with many retry transactions from the ProntoForms system. Subsequent retries occur after 1 hour, 10 hours, 2.8 days, etc. The retry process can be stopped by resolving the issue in the destination system, selecting the "Cancel automatic retries" button on the form submission, or by deleting the record in the ProntoForms system. Just like with the initial execution attempt, each time a re-execution fails, an email notification is sent to the “Problem Contact Email” address for the team.
Automatic Re-Executions and the Data Passthrough Feature
When using the Data Passthrough feature, automatic re-executions are limited. Please see the Data Passthrough overview for more information.
A re-execution can be initiated manually through the ProntoForms web portal as well. This can be useful after correcting configuration issues with a data destination, to test if the changes are effective (or if it is simply inconvenient to wait until the next automatic execution attempt).
Navigate to the desired data destination, and click the “Re-execute Failed Executions” button to re-process all failed form submissions associated with the data destination.
You can also re-execute the single failed step in an execution; click on the desired form submission name, then mouse over the desired step. A “re-execute” icon will appear to the right.
If a form submission fails to reach the data destination after (by default) three attempts, ProntoForms will send an email to the Problem Contact Email Address. You can adjust this default in the Data Destination Basics tab of the destination configuration.